The Honda Accord is a luxury car from its lofty cost down to its plush leather-trim seating. Though you may be tempted to ignore maintenance utterly, be certain your Accord’s fuel tank is properly put in and doesn’t want any repairs if you happen to’ve had your automotive a while. If it reveals dilapidation, it might be time to put in a new fuel tank in any Accord, especially fashions from 1984-1991.

1984-1991 Honda Accord Fuel Tank Removal and Installation Procedures

1. Remove the drain bolt from the fuel tank and empty the remaining gas right into a fuel container in 1990-1991 Honda Accords. Use a fuel-sending wrench to disconnect the sending unit connectors. Remove the hoses and the nuts holding the fuel tank straps to the tank in 1984-1989 Honda Accords. Lower the tank down onto an even floor earlier than moving on.
2. Grab your replacement fuel tank and place it under the Accord’s trunk. Put the fuel tank straps in place on the new tank. Use a torque wrench to tighten the retaining nuts to the specification of sixteen pounds. The identical applies on older models comparable to 1984, 1985 and 1986. Check the straps to verify that every thing is in the suitable spot.
3. Put the hoses and wiring connectors in place on the new fuel tank. Change the drain bolt on the fuel tank and alter the setting to 36 kilos along with your wrench on all models.
4. Open your fuel container and put a funnel into the fuel filler. Pour the gas slowly into the tank till the container is empty.
5. Get into your Accord and begin the engine to make sure everything is working smoothly. Let the engine run for a few minutes before taking it for a drive.